• Replace engine oil, filter and drain plug washer
• Replace air filter element
• Inspect and adjust all drive belts to factory specifications
• Inspect and ensure cooling fan is operating within factory specifications
• Check to ensure air conditioning and heating systems are operating within factory specifications
• Rotate tires, inspect tread wear and check and adjust tire pressure as needed
• Balance 4 tires
  
• Perform brake system inspection: pads and/or drums, lines, hoses and fluids
• Inspect suspension system and steering components to ensure factory specifications
• Service battery, clean terminals
• Inspect wiper blades and linkage operation
• Lubricate all door, trunk and hood latches and hinges if needed
• Inspect exhaust system and heat shields
• Inspect radiator and cooling system
• Adjust emergency brake to within factory specifications if needed
• Inspect and adjust fluid levels as needed
• Check turn signal, stop and headlight bulbs operation
• Factory trained technician to conduct road test
• Add MOC oil & fuel additives for better fuel economy
  

• Replace Pollen filter every 12,000 miles (if equipped)*
• Replace transmission fluid with Subaru High Performance Fluid
• Replace timing belt every 105,000 miles
• Scan EGR system and install software updates as needed (dealer recommended if over 36,000 miles)*
• Computer balance all four tires (dealer recommended)*
• Align all four wheels (dealer recommended)*

*Additional Charges May Apply